• Home
  • Browse
  • Search

Binary Rock

  1. 2002

2002-12-09 - Link Standalone Install

Read More
  • thats a lot of crap to install...

    thats a lot of crap to install...

  • feeding the wiring harness into the engine bay

    feeding the wiring harness into the engine bay

  • harness in the engine bay

    harness in the engine bay

  • laying the wires in the general direction they will go

    laying the wires in the general direction they will go

  • injector ballast resistors

    injector ballast resistors

  • ignition noise suppressor capacitor

    ignition noise suppressor capacitor

  • what the hell color is fawn?

    what the hell color is fawn?

  • apparently fawn = yellow. bah :)

    apparently fawn = yellow. bah :)

  • vacuum tees galore

    vacuum tees galore

  • new temp sender so i can run both ECUs simultaneously

    new temp sender so i can run both ECUs simultaneously

  • while im at it i may as well put in a 180 degree thermostat so scott will stop yelling at me :)

    while im at it i may as well put in a 180 degree thermostat so scott will stop yelling at me :)

  • since its a LHD installation, the ECU is much farther from the intake manifold, so i needed longer vacuum lines

    since its a LHD installation, the ECU is much farther from the intake manifold, so i needed longer vacuum lines

  • fastening ballast resistors

    fastening ballast resistors

  • ballast resistors bolted in

    ballast resistors bolted in

  • ignition-switched  12v comes from the line going to the coils

    ignition-switched 12v comes from the line going to the coils

  • vacuum tee for Link

    vacuum tee for Link

  • 180 degree thermostat

    180 degree thermostat

  • 2nd temperature sensor installed in place of AC fan switch (5:00 position)

    2nd temperature sensor installed in place of AC fan switch (5:00 position)

  • both temp sensors

    both temp sensors

  • new temp sensor wired up

    new temp sensor wired up

  • wiring up the fuel pump relay

    wiring up the fuel pump relay

  • finished fuel pump relay wiring

    finished fuel pump relay wiring

  • wiring up the injectors in two batches: 1-3-5, 2-4-6

    wiring up the injectors in two batches: 1-3-5, 2-4-6

  • injectors 1-4 are much easier with the 3000 pipe removed

    injectors 1-4 are much easier with the 3000 pipe removed

  • finished injector wiring

    finished injector wiring

  • tapping into the CPS signal

    tapping into the CPS signal

  • finished CPS connector wiring

    finished CPS connector wiring

  • finished!

    finished!

  • its alive! now comes the fun part. making it not run like ass

    its alive! now comes the fun part. making it not run like ass

  • drilling and tapping hole for the CORRECT temp sensor

    drilling and tapping hole for the CORRECT temp sensor

  • however, it interferes with the thermostat

    however, it interferes with the thermostat

  • so it cant screw in all the way

    so it cant screw in all the way

  • final temp sensor install

    final temp sensor install

  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2021 SmugMug, Inc.
    2nd temperature sensor installed in place of AC fan switch (5:00 position)
    both temp sensors
    new temp sensor wired up